Allendia

EVY manual

EVY is a MIDI effect. It makes no sound of its own; it reads the notes you hold and sends new ones to an instrument, drum rack or sampler on another track. This page covers requirements, installation, activation, routing, every control, and what to check when nothing plays.

What you need

All builds are 64-bit.

macOS 11 or laterVST3 and AU. Apple Silicon or Intel.
Windows 10 or 11VST3.
Linux x86_64VST3, from the .tar.gz archive.

Your host has to load MIDI-effect plug-ins. Live, Logic Pro, Cubase, FL Studio, Reaper, Studio One, Bitwig and GarageBand all do, though some of them keep these plug-ins under MIDI FX.

You also need something for EVY to play. A drum rack, a sampler, a synth. EVY sends notes and waits for a sound.

Install

Download the build for your system from allendia.com. The links at the foot of this page always point at the current signed build.

macOS

Open the .pkg and follow the prompts. It installs both formats:

  • VST3: /Library/Audio/Plug-Ins/VST3/
  • AU: /Library/Audio/Plug-Ins/Components/

Windows

Run the .exe and complete the wizard. The default folder is C:\Program Files\Common Files\VST3\, or wherever you point it.

Linux

Unpack the .tar.gz and follow the instructions inside. The plug-in ends up in your VST3 folder, usually ~/.vst3 or /usr/local/lib/vst3.

Rescan plug-ins, or restart the host, if EVY does not appear.

Activation and trial

The first time EVY opens, it asks for a licence.

  • Activate: paste the key from your purchase email. Activation needs a connection once. After that the plug-in checks the licence offline.
  • Start 14-day trial: the full instrument, with no account and no card. Preset and project-state saving stay off, and the MIDI output mutes for three seconds every thirty.
  • Buy: opens allendia.com.

The trial is tied to one computer, and the clock starts when you press the button.

If activation fails, check the connection first, then use the contact page.

Quick start

  1. Load EVY on an empty MIDI track.
  2. Load an instrument on a second track, and set its MIDI input to the EVY track.
  3. Arm the EVY track, hold a chord, and start the transport.
  4. Move something. Lower Repetition if the phrase loops too tightly. Drag the pad in the middle. Raise Capacity or Echo for longer lines, and push Random right for surprise.
  5. Reseed when nothing lands. The dice beside Capacity builds a new network and keeps your settings.
  6. Save what you like. The disk icon sits in the header.

No theory needed. Hold a chord you already like and let EVY walk around inside it.

Routing

EVY sends notes to another track. Two tracks do it in most hosts:

  1. Track 1 holds EVY and any MIDI effects you want after it. No instrument.
  2. Track 2 holds the instrument, drum rack or sampler.
  3. Set track 2’s MIDI input to track 1, after EVY’s effects.
  4. Arm track 1 and play.

Ableton Live

On track 2, set MIDI From to track 1 and the channel below it to Post FX. Arm track 2 or set its monitor to In, otherwise the notes arrive and you hear nothing. Track 1 only needs arming for live playing; a playing clip sends MIDI either way.

MIDI goes: keyboard or clip → EVY → instrument.

Other hosts

  • Logic Pro, GarageBand: insert EVY (AU) in the MIDI FX slot of the instrument channel, above the instrument.
  • Cubase, Reaper, Studio One, Bitwig, FL Studio: insert EVY before the instrument on the same track, or route the EVY track into an instrument track. The menus differ, so look for “MIDI effect” in the host’s documentation.

Drums and samplers

The routing stays the same. Only the receiving instrument changes.

Drum rack. Hold the pads you want to hear. If C1 is a kick and D1 a snare, hold both and EVY chooses between the two. Add more pads to widen the kit. Repetition and Random do most of the shaping.

Sampler. Map the held notes to the slices you want to trigger. Keep Length short so each note is clean, turn off looping for one-shots, and let Rate set the grid.

The routing notes in the blog go further, with a destination for each case.

How EVY thinks

A normal arpeggiator walks your chord in a fixed order: up, down, up and down. After two bars you can hear the pattern coming. EVY has no order to walk.

The notes you hold are the whole vocabulary. A small recurrent network picks among them at each step of the clock. Its connections are wired at random when the plug-in loads. Nothing was trained on music.

Two to fifty neurons is the entire model. A network that small cannot plan a melody, so it does what small networks do: it comes back to the figures it just played and varies them. That return is why a phrase can sound written.

Each step:

  1. The network’s state moves, pulled by its own past, the rhythm pulse, the XY pad and whatever it played last.
  2. It weighs every held note, and silence.
  3. EVY draws a note from those weights. Repetition, Proximity, Breath and the per-note knobs tilt the draw. Random sets how far it may wander from the likeliest note.

Reseeding builds a new network. Saving a preset or a project keeps the current one, so the character survives the session.

All of it runs locally, in real time. No cloud, no dataset.

The interface

Three panels in one window, with a header across the top. Hover a control for its tooltip; double-click to put it back to default.

Header

Preset nameClick to load a preset from a file.
◀ / ▶Step to the previous or next preset in the folder.
Disk iconSave the current settings as a preset.
UndoStep back one change.

Engine

The left panel shapes the network itself.

Map display. The screen at the top projects the network’s state over time. The path tells you whether the phrase is circling, drifting, stuck or exploring. Watch it while you turn knobs. The display does not take input.

ControlRangeWhat it changes
Feedback0–10, default 1How much of EVY’s own output goes back into the network. At 0 it ignores what it just played. Higher values make each note call and the next one answer.
Capacity2–50 neurons, default 5Size of the network. Few neurons give short, catchy motifs; more give longer, more intricate lines. Very high settings start to sound random, and the sweet spot is usually lower than you think.
Inertia0–1, default 1How slowly the state changes. High values evolve smoothly; low values make the phrase nervous and reactive.
Echo0–20, default 1How strongly each state carries into the next. Higher values deepen memory, so motifs persist and come back.
Linkon/off, default offTies Inertia and Echo together, so the memory span holds steady while you move either one. Useful for changing texture without losing the pattern.

Reseed (the dice beside Capacity) builds a new random network and keeps every setting. A different seed is a different player with the same habits.

Rhythm

The circle in the middle is the clock and the playground.

Step sequencer. The ring around the rim holds the sequence: one mark per step. The bright arcs are accents, steps that send a pulse to the network. The cycle follows your host’s tempo and transport.

Step sequencer settings (the gear on the ring) shape the pulse:

  • Steps, 2 to 64, default 16: how many steps are in the cycle.
  • Gain: strength of every pulse, or invert the set in one move.
  • Start: where in the cycle the pattern begins.

XY pad. The field of dots inside the circle is a two-dimensional modulation space. Drag the cursor to push the network around while it plays. Right-click to drop a checkpoint: a saved position you can return to. A few of them turn the pad into a set of scenes.

ControlRangeWhat it changes
Rate1/96 to 1/1, default 1/16Division of each step, from very fast to one note per bar. Triplet divisions included (1/3, 1/6, 1/12, 1/24, 1/48).
Length0–200%, default 50%Note duration as a share of the step. Short is plucky and staccato; long overlaps into legato lines.
Control X / Y−1 to 1, default 0The pad’s two modulation inputs. Automatable like any other control.

Notes

The right panel decides which of your notes EVY favours.

Probability display. The curves are the weight the network gives each held note at this moment. The dots above are the notes it actually chose.

ControlRangeWhat it changes
Random0–2000, default 1000Determinism at the left, chance at the right. Fully left, EVY takes the likeliest note every time and the part locks. To the right, it samples more freely.
Repetition0–1, default 0.5Weight for playing the note it just played. Below centre it avoids repeats; above centre it leans into them.
Proximity0–1, default 0Weight for pitches next to the last one. High values give stepwise, singable lines; low values leap.
Breath0–1, default 0Chance of a rest on a step. A little goes a long way, and a phrase with gaps usually grooves harder than one without.
Holdon/off, default offKeeps the chord alive after you let go, until you play the next one. Handy for one-handed tweaking on stage.

Per-note knobs. The bottom row shows the notes you hold, ten at a time and up to fifty in total. Each knob sets that pitch’s weight, so you can push the root, pull a tension back, or mute a note outright. The arrows page through the chord, and Reset puts every weight back.

Parameter reference

Every control is exposed to your host for automation and MIDI mapping, Control X and Y included. Pad gestures can be recorded as automation, and a hardware controller can drive the same two parameters.

ParameterPanelRangeDefault
FeedbackEngine0–101
CapacityEngine2–505
InertiaEngine0–11
EchoEngine0–201
LinkEngineon/offoff
RateRhythm1/96–1/11/16
LengthRhythm0–200%50%
StepsRhythm2–6416
StartRhythmstep index0
Accents 1–16Rhythm0–1step 1 = 1
Control X / YRhythm−1 to 10
RandomNotes0–20001000
RepetitionNotes0–10.5
ProximityNotes0–10
BreathNotes0–10
Note 1–10Notes0–10.5
HoldNoteson/offoff

Defaults are what a new instance starts from.

Presets

A preset stores every parameter and the seed of the network. That is why loading one brings back the phrase itself. Same knobs, different seed, different player.

Click the preset name to browse for a file, or use the arrows to step through the current folder. The disk icon saves the current settings, name and location included.

Projects behave the same way. EVY writes its state and seed into the DAW session, so tomorrow’s playback matches today’s.

Saving is disabled during the trial. Nothing else is.

Troubleshooting

Nothing plays

EVY produces no audio. Check that the instrument track’s input is the EVY track, after its effects. In Live that is MIDI From: the EVY track, channel Post FX. Then check the instrument track is armed or monitoring. A track that receives notes but is not armed stays quiet.

The output drops out every thirty seconds

That is the trial muting for three seconds. A licence removes it.

EVY is not in the plug-in list

Rescan, or restart the host. On macOS the AU lives in Components and the VST3 in VST3, so a host that scans only one will only see one. Look under MIDI effects. Some hosts keep them below the instrument list.

The phrase is too random

Lower Capacity, move Random left, raise Repetition, lower Echo. If it still wanders, reseed. Some networks are simply wilder than others.

The phrase is stuck on one note

Lower Repetition, raise Capacity, Echo and Random a little, or nudge the XY pad. The network has fallen into a corner of its state space and needs a push.

I lost a good phrase

Double-click any control to reset it, or use Undo in the header. Reseeding keeps your settings, so you can roll the dice without losing the panel.

None of this helped

Write to us through the contact page with your system, your host and its version, and the steps that led to the problem.

Licence

One licence covers three machines. The key arrives by email with the download link.

Moving to a new computer? Deactivate the old machine, then activate the new one. If the old machine is gone, write to us and we will release the seat.

Current builds:

Download for macOS · Download for Windows · Download for Linux